feat(sway): add initial sway config

.gitignore

@@ -49,3 +49,9 @@ git/*
 ghostty/*
 !ghostty/config
 !ghostty/themes
+
+# sway
+!sway
+sway/*
+!sway/config
+!sway/config.d

sway/config

@@ -0,0 +1,199 @@
+include config.d/*
+
+### Output configuration
+#
+# Default wallpaper (more resolutions are available in /run/current-system/sw/share/backgrounds/sway/)
+output * bg ~/.assets/wallpaper.png fill
+#
+# Example configuration:
+#
+#   output HDMI-A-1 resolution 1920x1080 position 1920,0
+#
+# You can get the names of your outputs by running: swaymsg -t get_outputs
+
+### Idle configuration
+#
+# Example configuration:
+#
+exec swayidle -w 
+# This will lock your screen after 300 seconds of inactivity, then turn off
+# your displays after another 300 seconds, and turn your screens back on when
+# resumed. It will also lock your screen before your computer goes to sleep.
+
+### Input configuration
+#
+# Example configuration:
+#
+#   input type:touchpad {
+#       dwt enabled
+#       tap enabled
+#       natural_scroll enabled
+#       middle_emulation enabled
+#   }
+#
+#   input type:keyboard {
+#       xkb_layout "eu"
+#   }
+#
+# You can also configure each device individually.
+# Read `man 5 sway-input` for more information about this section.
+
+### Key bindings
+#
+# Basics:
+#
+    # Start a terminal
+
+    # Kill focused window
+
+    # Start your launcher
+
+    # Drag floating windows by holding down $mod and left mouse button.
+    # Resize them with right mouse button + $mod.
+    # Despite the name, also works for non-floating windows.
+    # Change normal to inverse to use left mouse button for resizing and right
+    # mouse button for dragging.
+    floating_modifier $mod normal
+
+    # Reload the configuration file
+
+    # Exit sway (logs you out of your Wayland session)
+#
+# Moving around:
+#
+    # Move your focus around
+    bindsym $mod+$left focus left
+    bindsym $mod+$down focus down
+    bindsym $mod+$up focus up
+    bindsym $mod+$right focus right
+
+    # Move the focused window with the same, but add Shift
+    bindsym $mod+Shift+$left move left
+    bindsym $mod+Shift+$down move down
+    bindsym $mod+Shift+$up move up
+    bindsym $mod+Shift+$right move right
+#
+# Workspaces:
+#
+    # Switch to workspace
+    bindsym $mod+1 workspace number 1
+    bindsym $mod+2 workspace number 2
+    bindsym $mod+3 workspace number 3
+    bindsym $mod+4 workspace number 4
+    bindsym $mod+5 workspace number 5
+    bindsym $mod+6 workspace number 6
+    bindsym $mod+7 workspace number 7
+    bindsym $mod+8 workspace number 8
+    bindsym $mod+9 workspace number 9
+    bindsym $mod+0 workspace number 10
+    # Move focused container to workspace
+    bindsym $mod+Shift+1 move container to workspace number 1
+    bindsym $mod+Shift+2 move container to workspace number 2
+    bindsym $mod+Shift+3 move container to workspace number 3
+    bindsym $mod+Shift+4 move container to workspace number 4
+    bindsym $mod+Shift+5 move container to workspace number 5
+    bindsym $mod+Shift+6 move container to workspace number 6
+    bindsym $mod+Shift+7 move container to workspace number 7
+    bindsym $mod+Shift+8 move container to workspace number 8
+    bindsym $mod+Shift+9 move container to workspace number 9
+    bindsym $mod+Shift+0 move container to workspace number 10
+    # Note: workspaces can have any name you want, not just numbers.
+    # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+    # You can "split" the current object of your focus with
+    # $mod+b or $mod+v, for horizontal and vertical splits
+    # respectively.
+    bindsym $mod+b splith
+    bindsym $mod+v splitv
+
+    # Switch the current container between different layout styles
+    bindsym $mod+s layout stacking
+    bindsym $mod+w layout tabbed
+    bindsym $mod+e layout toggle split
+
+    # Make the current focus fullscreen
+    bindsym $mod+f fullscreen
+
+    # Toggle the current focus between tiling and floating mode
+    bindsym $mod+Shift+space floating toggle
+
+    # Swap focus between the tiling area and the floating area
+    bindsym $mod+space focus mode_toggle
+
+    # Move focus to the parent container
+    bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+    # Sway has a "scratchpad", which is a bag of holding for windows.
+    # You can send windows there and get them back later.
+
+    # Move the currently focused window to the scratchpad
+    bindsym $mod+Shift+minus move scratchpad
+
+    # Show the next scratchpad window or hide the focused scratchpad window.
+    # If there are multiple scratchpad windows, this command cycles through them.
+    bindsym $mod+minus scratchpad show
+#
+# Resizing containers:
+#
+mode "resize" {
+    # left will shrink the containers width
+    # right will grow the containers width
+    # up will shrink the containers height
+    # down will grow the containers height
+    bindsym $left resize shrink width 10px
+    bindsym $down resize grow height 10px
+    bindsym $up resize shrink height 10px
+    bindsym $right resize grow width 10px
+
+    # Ditto, with arrow keys
+    bindsym Left resize shrink width 10px
+    bindsym Down resize grow height 10px
+    bindsym Up resize shrink height 10px
+    bindsym Right resize grow width 10px
+
+    # Return to default mode
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+bindsym $mod+r mode "resize"
+#
+# Utilities:
+#
+    # Special keys to adjust volume via PulseAudio
+    bindsym --locked XF86AudioMute exec pactl set-sink-mute \@DEFAULT_SINK@ toggle
+    bindsym --locked XF86AudioLowerVolume exec pactl set-sink-volume \@DEFAULT_SINK@ -5%
+    bindsym --locked XF86AudioRaiseVolume exec pactl set-sink-volume \@DEFAULT_SINK@ +5%
+    bindsym --locked XF86AudioMicMute exec pactl set-source-mute \@DEFAULT_SOURCE@ toggle
+    # Special keys to adjust brightness via brightnessctl
+    bindsym --locked XF86MonBrightnessDown exec brightnessctl set 5%-
+    bindsym --locked XF86MonBrightnessUp exec brightnessctl set 5%+
+    # Special key to take a screenshot with grim
+
+    bindsym --locked XF86AudioNext exec playerctl next
+    bindsym --locked XF86AudioPause exec playerctl play-pause
+    bindsym --locked XF86AudioPlay exec playerctl play-pause
+    bindsym --locked XF86AudioPrev exec playerctl previous
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+bar {
+    position top
+
+    # When the status_command prints a new line to stdout, swaybar updates.
+    # The default just shows the current date and time.
+    status_command while date +'%Y-%m-%d %X'; do sleep 1; done
+
+    colors {
+        statusline #ffffff
+        background #323232
+        inactive_workspace #32323200 #32323200 #5c5c5c
+    }
+}
+
+include /etc/sway/config.d/*

sway/config.d/00-var.conf

@@ -0,0 +1,11 @@
+set $mod Mod4
+
+# vim style
+set $left h
+set $down j
+set $up k
+set $right l
+
+# programs
+set $term ghostty
+set $menu wofi --show drun -iIG -w 2

sway/config.d/10-input.conf

@@ -0,0 +1,4 @@
+input "type:keyboard" {
+    repeat_delay 150
+    repeat_rate 35
+}

sway/config.d/20-workspace.conf

@@ -0,0 +1,22 @@
+# ws2
+assign [app_id="google-chrome"] workspace 2
+
+# ws3
+assign [app_id="thunderbird"] workspace 3
+
+# ws4
+assign [app_id="Cider"] workspace 4
+
+# ws5
+assign [class=".*BoltLauncher.*"] workspace 5
+assign [class="net-runelite-client-RuneLite"] workspace 5
+
+# ws8
+assign [app_id="vesktop"] workspace 8
+assign [app_id="Slack"] workspace 8
+assign [app_id="org.telegram.desktop"] workspace 8
+assign [class="Rocket.Chat"] workspace 8
+
+
+# i also had these in hyprland
+# for_window [class=".*"] fullscreen disable

sway/config.d/30-keybind.conf

@@ -0,0 +1,16 @@
+bindsym $mod+Return exec $term
+
+bindsym $mod+Shift+q kill
+
+bindsym $mod+d exec $menu
+    
+bindsym $mod+Shift+c reload
+
+bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
+
+bindsym $mod+Shift+Ctrl+Alt+space exec 1password --quick-access
+
+bindsym $mod+u exec swaylock
+
+
+bindsym Print exec grim -g "$(slurp -d)" - | wl-copy

sway/config.d/40-autostart.conf

@@ -0,0 +1,31 @@
+exec $term
+
+exec google-chrome-stable
+
+exec protonmail-bridge -n
+exec thunderbird
+
+exec cider-2
+
+exec TZ="Europe/Ljubljana" bolt-launcher
+
+exec vesktop
+exec slack
+exec Telegram
+exec rocketchat-desktop
+
+# for_window [app_id="discord"] mark discord
+# for_window [app_id="telegram-desktop"] mark telegram
+# for_window [app_id="Slack"] mark slack
+# for_window [app_id="rocketchat"] mark rocketchat
+#
+# workspace 8 layout splith
+#
+# exec_always {
+#     swaymsg '[con_mark="discord"] focus'
+#     swaymsg '[con_mark="telegram"] move right'
+#     swaymsg '[con_mark="slack"] move right'
+#     swaymsg '[con_mark="rocketchat"] move right'
+# }
+
+exec 1password --silent